Hot Products

China CA400 Multi-Wire Cutting Equipment Factory - Efficient Suppliers for Sapphire and Quartz Processing

The CA400 Multi-Wire Cutting Equipment, manufactured in China, is an advanced solution for batch processing of super-hard and brittle materials, including sapphire, quartz crystals, special ceramics, and silicon nitride. This innovative factory-designed equipment enables the cutting of these materials into precise straight sheets efficiently.

By utilizing a swinging mechanism for the workpiece, the CA400 enhances cutting speed while minimizing the cutting area. This design not only ensures high processing efficiency and operational stability but also provides versatility across various applications. As a leading supplier in the industry, we emphasize the economic and practical benefits of our cutting-edge technology.

Product Detail

Product Features

Roller Double Cone Positioning Facilitates easy loading and unloading.

8-Guide Wheel Design Reduces disconnection rates and enables fast winding.

Swing Cutting Enhances cutting force for efficient processing.

Lower Workbench Simplifies operation.

Three-Sided Square Cutting Chamber Facilitates easy operation and maintenance.

Disconnection and Continuous Cutting Function Capable of both interrupted and continuous cutting operations.

Technical Parameters

Project	Content	Technical Parameters
Model	Model	CA400
Processing capacity	Max processing billet size	Ф125×260mm
Processing capacity	Number of stations	1
Roller specifications	Roller outer diameter × glue length × quantity	（Ф145±10 mm ）×266×3
Diamond thread	Diamond wire diameter	Ф0.12-Ф0.25
	Max line storage capacity	20 km (φ0.25mm)
	Max round-trip routing speed	900 m/min
Workbench	Workbench lifting stroke	150mm
	Workbench swing	±7°
	Cutting method	Vertical upward feed
	Cutting feed speed	0.1-99.9mm/min
Cutting fluid	Cutting fluid	Water-based or oil-based cutting fluid
	Liquid storage capacity	220L
	Pump flow	200L/min
Power/air source	Power supply	380V±10%、50Hz
	Power	30 Kw
	Air source	Using water-based cutting fluid, air pressure requirements≥0.35 MPa
Dimensions and weight	Dimensions (L x W x H)	3100 × 1490 × 2360 mm
Dimensions and weight	Weight	4000 Kg

Frequently Asked Questions

What are the main benefits of the 8-Guide Wheel Design?

The 8-Guide Wheel Design is engineered to reduce wire disconnection rates during operation while enabling significantly faster winding speeds, which enhances overall productivity.

What types of cutting fluids can be used with the CA400?

The CA400 is highly versatile and supports both water-based and oil-based cutting fluids, featuring a large liquid storage capacity of 220L and a pump flow rate of 200L/min.

What is the maximum processing capacity of this machine?

This model features a single station configuration that can handle a maximum processing billet size of Ф125×260mm.

Does the machine support continuous cutting operations?

Yes, it features a disconnection and continuous cutting function, making it fully capable of both interrupted and continuous cutting operations depending on your processing needs.

What are the dimensions and weight of the CA400 unit?

The equipment has physical dimensions of 3100 × 1490 × 2360 mm (L x W x H) and a total weight of approximately 4000 Kg.

What are the power and air pressure supply requirements?

It requires a power supply of 380V±10% at 50Hz, with a power consumption of 30 Kw. When using water-based cutting fluid, the system requires an air source pressure of ≥0.35 MPa.