CX120A Multi-Wire Saw Machine for Rare Earth and Quartz Cutting | China Suppliers & Factory Equipment
Product Features
- Double-Station Workbench Allows simultaneous cutting of two material plates.
- Integral Casting Structure of Roller Frame High damping coefficient and excellent vibration damping performance.
- High-Precision Cone Positioning for Rollers and Retractable Reels Controls wire network jitter effectively with high precision and rigidity.
- Front and Rear Displacement Function of Workbench Enables cutting of products with different thicknesses at the same roller pitch.
- Variable Winding Mode Enables cutting of <170mm products by switching winding modes.
- Standard Universal Wire Wheel (PV600 Reinforced I-Shaped Wheel) Eliminates the need for rewinding.
- Equipped with Disconnection and Continuous Cutting Function Supports continuous cutting operations.
Technical Parameters
| Project | Content | Technical Parameters |
|---|---|---|
| Model | Model | CX120A |
| Processing capacity | Material plate size | 160×690mm |
| Total number of plates | 4 | |
| Number of stations | 2 | |
| Winding spacing | 85/170mm | |
| Number of winding stations | 16/14 | |
| Roller specifications | Outer diameter of roller × Number of slotting in single station × quantity | （Ф130±10 mm ）×15×3 |
| Diamond thread | Diamond wire diameter | Ф0.12-Ф0.25 |
| Max line storage capacity | 40 km (φ0.25mm) | |
| Max round-trip routing speed | 1000 m/min | |
| Workbench | Workbench lifting stroke | 220mm |
| Workbench translation stroke | 200mm | |
| Cutting method | Vertical upward feed | |
| Cutting feed speed | 0.1-99.9mm/min | |
| Cutting fluid | Cutting fluid | Water-based or oil-based cutting fluid |
| Liquid storage capacity | 800L | |
| Pump flow | 200×2L/min | |
| Power/air source | Power supply | 380V±10%、50Hz |
| Power | 26 Kw | |
| Air source | Using water-based cutting fluid, air pressure requirements≥0.4 MPa | |
| Dimensions and weight | Dimensions (L x W x H) | 4000 × 1900 × 2600 mm |
| Weight | 8500 Kg |
Frequently Asked Questions (FAQ)
1. What is the benefit of the Double-Station Workbench on the CX120A?
The Double-Station Workbench allows for the simultaneous cutting of two material plates, significantly increasing processing capacity and efficiency.
2. What type of cutting fluid can be used with this machine?
The CX120A supports both water-based and oil-based cutting fluids. It is equipped with a large liquid storage capacity of 800L and a pump flow rate of 200×2L/min.
3. How does the machine control wire network jitter during operation?
It features high-precision cone positioning for rollers and retractable reels, which effectively controls wire network jitter with high precision and rigidity.
4. What is the maximum round-trip routing speed of the diamond wire?
The machine can reach a maximum round-trip routing speed of up to 1000 m/min, with a maximum line storage capacity of 40 km (for φ0.25mm wire).
5. Does the CX120A support continuous cutting if the wire breaks?
Yes, the machine is equipped with a disconnection and continuous cutting function that supports continuous cutting operations to minimize downtime.
6. What are the overall dimensions and weight of the CX120A?
The physical dimensions of the machine are 4000 × 1900 × 2600 mm (L x W x H), and it has an overall weight of approximately 8500 Kg.
Product Features
Technical Parameters
| Project | Content | Technical Parameters |
|---|---|---|
| Model | Model | CX120A |
| Processing capacity | Material plate size | 160×690mm |
| Total number of plates | 4 | |
| Number of stations | 2 | |
| Winding spacing | 85/170mm | |
| Number of winding stations | 16/14 | |
| Roller specifications | Outer diameter of roller × Slotting × Quantity | （Ф130±10 mm ）×15×3 |
| Diamond thread | Diamond wire diameter | Ф0.12-Ф0.25 |
| Max line storage capacity | 40 km (φ0.25mm) | |
| Max round-trip routing speed | 1000 m/min | |
| Workbench | Lifting stroke | 220mm |
| Translation stroke | 200mm | |
| Cutting method | Vertical upward feed | |
| Cutting feed speed | 0.1-99.9mm/min | |
| Cutting fluid | Fluid type | Water-based or oil-based |
| Storage capacity | 800L | |
| Pump flow | 200×2L/min | |
| Power/air source | Power supply | 380V±10%、50Hz |
| Power | 26 Kw | |
| Air source | ≥0.4 MPa (for water-based) | |
| Dimensions and weight | Dimensions (L x W x H) | 4000 × 1900 × 2600 mm |
| Weight | 8500 Kg |
Frequently Asked Questions
The double-station design allows for the simultaneous cutting of two material plates, significantly increasing production efficiency and throughput compared to single-station models.
Yes, the machine features a front and rear displacement function for the workbench, which enables it to cut products of varying thicknesses while maintaining the same roller pitch.
The system is versatile and compatible with both water-based and oil-based cutting fluids, allowing you to choose the best option for your specific material requirements.
The CX120A supports a maximum round-trip routing speed of up to 1000 m/min, ensuring high-speed precision cutting for industrial applications.
No, it uses a standard universal wire wheel (PV600 Reinforced I-Shaped Wheel), which eliminates the need for time-consuming rewinding processes.
The machine is equipped with a disconnection and continuous cutting function, which supports the resumption of operations to minimize material waste and downtime.