Hot Products
Multi-Wire Saw Squarer Equipment CX153A - China Suppliers and Factory for Cutting Rare Earth, Quartz, Glass, and Metals
Product Features
The workbench adopts a double-station configuration, allowing simultaneous cutting of two material plates.
The roller frame features an overall casting structure with a high damping coefficient and excellent damping performance.
High-precision and high-rigidity cone positioning is employed for the roller and retractable reel to effectively control the wire network's jitter.
Utilizes a standard universal wire wheel (PV600 reinforced I-shaped wheel) for wire release, eliminating the need for rewinding.
Equipped with advanced functions for both disconnection and continuous cutting.
Technical Parameters
| Project | Content | Technical Parameters |
|---|---|---|
| Model | Model | CX153A |
| Processing capacity | Material plate size | 220×660mm / 220×870mm |
| Total number of plates | 2×2 | |
| Number of stations | 2 | |
| Roller specifications | Outer diameter × Slots × Quantity | (Ф110±10 mm) × 1540 × 5 |
| Diamond thread | Diamond wire diameter | Ф0.12 - Ф0.25 |
| Max line storage capacity | 40 km (φ0.25mm) | |
| Max routing speed | 1000 m/min | |
| Workbench | Lifting stroke | 370mm |
| Cutting method | Vertical upward feed | |
| Cutting feed speed | 0.1-99.9mm/min | |
| Cutting fluid | Type | Water-based or oil-based |
| Liquid storage capacity | 800L | |
| Pump flow | 200×2 L/min | |
| Power/Air source | Power supply | 380V±10%, 50Hz |
| Power | 55 Kw | |
| Air source | Pressure ≥0.4 MPa | |
| Dimensions & Weight | Dimensions (L x W x H) | 3500 × 2600 × 2700 mm |
| Weight | 8500 Kg |
Frequently Asked Questions
1. What is the benefit of the double-station configuration?
The double-station design allows for the simultaneous cutting of two material plates, significantly increasing processing efficiency and throughput.
2. Does the wire release system require manual rewinding?
No, the machine utilizes a standard universal wire wheel (PV600 reinforced I-shaped wheel) for wire release, which eliminates the need for rewinding.
3. What types of cutting fluids are compatible with the CX153A?
The system is versatile and can be used with either water-based or oil-based cutting fluids, depending on your specific material requirements.
4. How does the machine ensure cutting precision?
Precision is maintained through high-precision cone positioning for the roller and retractable reel, effectively controlling wire jitter during operation.
5. What is the maximum wire speed of this machine?
The CX153A supports a maximum round-trip routing speed of up to 1000 meters per minute.
6. What are the air pressure requirements for water-based fluid use?
When using water-based cutting fluid, the air source pressure must be equal to or greater than 0.4 MPa.